Submit GO
×
 Scotty's Action Sports Network
Dive Center and Scuba Diving

Learn how to explore a wreck safely.

Become a Technical Wreck Diver now.

Explore any wrecks in the world with your Tec Wreck.

Technical Diving: The SSI Technical Wreck diving course.

SSI technical wreck diving course The purpose of the SSI Technical Wreck diving course is to provide divers the best knowledge for doing deep penetrations into shipwrecks with unlimed decompression.

With the SSI Technical Wreck diving certification, you will be able to explore in deep any wrecks worldwide using multi-stage deco tanks and unlimited decompression, which will allow you a lot of time to spend inside a wreck.

During the Technical Wreck diver course, you will simulate many dangerous situations for you to learn how to explore a wreck safely and how to handle these situations in case it happen one day.

The Technical wreck diving course allows you to use different gases like a Trimix, Nitrox, Oxygen, use specific types of equipment and improve your skills to be able to penetrate any wrecks in the world.

Where to learn the SSI Technical Wreck diving course?

All the overhead environment and technical diving classes, courses and lessons, are taught in our Scotty's headquarters in Shangri-la Mactan, Cebu region.
If you are not a guest of the Shangri-la hotel, you can always walk in to our dive center, or we can pick you up at your hotel.

For any questions or inquiry Do not hesitate to contact us by filling the form below, or call us on our landline (scroll down to the bottom)

Contact us Now!


Why do you need to learn the SSI Technical Wreck diving?

Technical wreck diving course The SSI Technical Wreck diving course will take you on an epic adventure in venturing sunken wrecks and making your way in and out safely.

This class will allow you to explore in deep any wrecks around the world at any depth with unlimited decompression stops.

There are a lot of dangers inheritance to deep wreck penetration, especially when you are laying lines and you cannot see the light outside. The Technical Wreck diving course will teach you how to prevent these inners dangers.

You will also learn about a situation where you lost light (total failure), or how to recover the guide line when if you lost it, even the different procedures where a diver is lost.

At the end of this course and once completing the program, you will earn the SSI Technical Wreck Diving certification, which will give you the pass to dive any wrecks with the knowledge and skill required.

During the SSI Technical Wreck diving course, you will learn:

Technical wreck diving course You will learn a lot on how to explore a wreck properly. Below are listed just a few skills and training you will do during this class.

  • Advanced level in buoyancy control and finning techniques in overhead environment.
  • Proper usage of laying lines, put a gap and a jump line.
  • Light and body contact signals.
  • Handling lost line, lost lights and lost diver situations.
  • Planning your decompression, drop your deco tanks and get them back.
  • Proper knots and care of sharp and unstable objects.
  • Learn how to handle the inner dangers of wreck diving (like escaping entangle nets).

And a lot much more.
If using trimix during this course, you will dive at a maximum depth of 60 meters (200 feet) with an END (Equivalent Narcotic Depth) between 20 and 25 meters max (the same rule that applies for cave diving).

When can you start to learn Technical Wreck Diving?

When you want!
You can come in our Scotty's dive shop in Mactan, Cebu region, or call us on our landline (scroll down), or email us by clicking the button below to fill up the online form.

Contact us Now!


The scuba diving gear needed with the SSI Technical Wreck diving course includes:

Underwater flash light and 2 spare flash lights, 2 first stage regulator, 2 second stage regulator, exposure suit with side pockets, BCD doughnut, SMB, cutting tool, 3 diving spool (40-50 meters each), exploration reel (120 meters), Jet fins, mask and another spare mask, technical diving equipments, 1 long hose (2.10m - 7ft), hogarthian harness, back plate, twin tank, as many deco tanks and their regulars as needed.

You can use a sidemount gear during this course if you are qualified for.

Want to take your diving experience further?

If you want some diving classes alternative and lessons or want to know what's best next for your education, take a look at the three options below.

You might also be interested in this scuba diving course from another scuba diving agency:
PADI tec 100 CCR rebreather course.

Book your SSI technical wreck diving courses now!

* First name:
* Last name:
* Your email:

In order to prepare your SCUBA diving certification

Arrival date:

Departure Date:

Where are you staying?

Are you a certified diver?

In order to take a Tec Diving course, you need to be a certified diver:

In which SCUBA diving courses are you interested?

Check the box if you like to tell us which courses you are interested in:

First Booking day (you can always change it by contacting us)

Your dive plan

Your inquiry

Feel free to tell us more about you and your inquiry (2000 characters maximum).

Characters left.

Subscribe to our news letter?

SCUBA diving newsletter

Image focus

 

SSI Technical Sidemount course
The SSI Tec Sidemount course combines well with the Technical Wreck Diving.
FreeCurrencyRates.com